Differences

This shows you the differences between two versions of the page.

--- en:docs:fapi:dosdevioctl [2021/08/20 04:35] – prokushev
+++ en:docs:fapi:dosdevioctl [2021/11/28 10:33] (current) – prokushev
@@ Line 5: / Line 5: @@
 This call performs control functions on a device specified by an opened device handle.
-==Syntax==
+===== Syntax =====
- DosDevIOCtl (Data, ParmList, Function, Category, DevHandle)
+<code c>
+DosDevIOCtl (Data, ParmList, Function, Category, DevHandle)
+</code>
-==Parameters==
+===== Parameters =====
-;Data (PVOID) - input : Address of the data area.
-;ParmList (PVOID) - input : Address of the command-specific argument list.
+  * Data ([[PVOID]]) - input : Address of the data area.
-;Function (USHORT) - input : Device-specific function code.
+  * ParmList ([[PVOID]]) - input : Address of the command-specific argument list.
-;Category (USHORT) - input : Device category.
+  * Function ([[USHORT]]) - input : Device-specific function code.
-;DevHandle (HFILE) - input : Device handle returned by DosOpen or a standard (open) device handle.
+  * Category ([[USHORT]]) - input : [[Device category]].
+  * DevHandle ([[HFILE]]) - input : Device handle returned by DosOpen or a standard (open) device handle.
+===== Return Code =====
+rc ([[USHORT]]) - return
-==Return Code==
- rc (USHORT) - return
 Return code descriptions are:
-* 0  NO_ERROR
-* 1  ERROR_INVALID_FUNCTION
-* 6  ERROR_INVALID_HANDLE
-* 15  ERROR_INVALID_DRIVE
-* 31  ERROR_GEN_FAILURE
-* 87  ERROR_INVALID_PARAMETER
-* 115  ERROR_PROTECTION_VIOLATION
-* 117  ERROR_INVALID_CATEGORY
-* 119  ERROR_BAD_DRIVER_LEVEL
-* 163  ERROR_UNCERTAIN_MEDIA
-* 165  ERROR_MONITORS_NOT_SUPPORTED
-==Remarks==
+  * 0  NO_ERROR
+  * 1  ERROR_INVALID_FUNCTION
+  * 6  ERROR_INVALID_HANDLE
+  * 15  ERROR_INVALID_DRIVE
+  * 31  ERROR_GEN_FAILURE
+  * 87  ERROR_INVALID_PARAMETER
+  * 115  ERROR_PROTECTION_VIOLATION
+  * 117  ERROR_INVALID_CATEGORY
+  * 119  ERROR_BAD_DRIVER_LEVEL
+  * 163  ERROR_UNCERTAIN_MEDIA
+  * 165  ERROR_MONITORS_NOT_SUPPORTED
+===== Remarks =====
 Values returned in the range hex FF00 through FFFF are user dependent error codes. Values returned in the range hex FE00 through FEFF are device driver dependent error codes.
-Refer to the ''IBM Operating System/2 Version 1.2 I/O Subsystems And Device Support Volume 1'' for a complete listing of control functions (DevHlp calls).
+Refer to the [[http://www.os2museum.com/files/docs/os212pti/64F3959_OS2_V1_2_PTI_IO_Subsystems_and_Device_Support_Vol_1_Device_Drivers.pdf|IBM Operating System/2 Version 1.2 I/O Subsystems And Device Support Volume 1]] for a complete listing of control functions (DevHlp calls).
+==== Family API Considerations ====
-===Family API Considerations===
 Some options operate differently in the DOS mode than in the OS/2 mode. Therefore, the following considerations apply to DosDevIOCtl when coding for the DOS mode.
 The level of support for DosDevIOCtl is identified by category and function code with a noted restriction if it is not supported by DOS 2.X or DOS 3.X Functions tend to be more restrictive in lower version numbers of DOS.
-*Category 1 supported as follows:
+  *Category 1 supported as follows:
-**41H Set Baud Rate
+    *41H Set Baud Rate
-**42H Set Line Control
+    *42H Set Line Control
-**All other category 1 functions are not supported for DOS 2.X and DOS 3.X.
+    *All other category 1 functions are not supported for DOS 2.X and DOS 3.X.
-*Category 2 not supported in FAPI
+  *Category 2 not supported in FAPI
-*Category 3 not supported in FAPI
+  *Category 3 not supported in FAPI
-*Category 4 not supported in FAPI
+  *Category 4 not supported in FAPI
-*Category 5 supported in FAPI as follows:
+  *Category 5 supported in FAPI as follows:
-**42H Set Frame control - supports IBM Graphics Printers only
+    *42H Set Frame control - supports IBM Graphics Printers only
-**44H Set Infinite Retry - for DOS 2.X and DOS 3.X, the function is in effect only for the duration of the calling program
+    *44H Set Infinite Retry - for DOS 2.X and DOS 3.X, the function is in effect only for the duration of the calling program
-**46H Initialize printer
+    *46H Initialize printer
-**62H Get Frame Control - not supported for DOS 2.X and DOS 3.X
+    *62H Get Frame Control - not supported for DOS 2.X and DOS 3.X
-**64H Get Infinite Retry
+    *64H Get Infinite Retry
-**66H Get Printer Status.
+    *66H Get Printer Status.
-*Category 6 not supported in FAPI
+  *Category 6 not supported in FAPI
-*Category 7 not supported in FAPI
+  *Category 7 not supported in FAPI
-*Category 8 supported in FAPI as follows:
+  *Category 8 supported in FAPI as follows:
-**00H Lock Drive - not supported for versions below DOS 3.2
+    *00H Lock Drive - not supported for versions below DOS 3.2
-**01H Unlock Drive - not supported for versions below DOS 3.2
+    *01H Unlock Drive - not supported for versions below DOS 3.2
-**02H Redetermine Media - not supported for versions below DOS 3.2
+    *02H Redetermine Media - not supported for versions below DOS 3.2
-**03H Set Logical Map - not supported for versions below DOS 3.2
+    *03H Set Logical Map - not supported for versions below DOS 3.2
-**20H Block Removable - not supported for versions below DOS 3.2
+    *20H Block Removable - not supported for versions below DOS 3.2
-**21H Get Logical Map - not supported for versions below DOS 3.2
+    *21H Get Logical Map - not supported for versions below DOS 3.2
-**43H Set Device Parameters - not supported for DOS 2.X and DOS 3.X
+    *43H Set Device Parameters - not supported for DOS 2.X and DOS 3.X
-**44H Write Track - not supported for DOS 2.X and DOS 3.X
+    *44H Write Track - not supported for DOS 2.X and DOS 3.X
-**45H Format Track - not supported for DOS 2.X and DOS 3.X
+    *45H Format Track - not supported for DOS 2.X and DOS 3.X
-**63H Get Device Parameters - not supported for DOS 2.X and DOS 3.X
+    *63H Get Device Parameters - not supported for DOS 2.X and DOS 3.X
-**64H Read Track - not supported for DOS 2.X and DOS 3.X
+    *64H Read Track - not supported for DOS 2.X and DOS 3.X
-**65H Verify Track - not supported for DOS 2.X and DOS 3.X.
+    *65H Verify Track - not supported for DOS 2.X and DOS 3.X.
-*Category 9 is reserved
+  *Category 9 is reserved
-*Category 10 (0AH) not supported in FAPI
+  *Category 10 (0AH) not supported in FAPI
-*Category 11 (0BH) not supported in FAPI.
+  *Category 11 (0BH) not supported in FAPI.
-==Example Code==
-===C Binding===
+===== Bindings =====
-<PRE>
+==== C Binding ====
+<code c>
 #define INCL_DOSDEVICES
@@ Line 87: / Line 97: @@
 USHORT           rc;            /* return code */
-</PRE>
+</code>
-===MASM Binding===
+==== MASM Binding ====
-<PRE>
+<code asm>
 EXTRN  DosDevIOCtl:FAR
 INCL_DOSDEVICES     EQU 1
@@ Line 100: / Line 111: @@
 PUSH   WORD    DevHandle     ;Device handle
 CALL   DosDevIOCtl
+</code>
 Returns WORD
-</PRE>
-====== Note ======
+===== Note =====
 Text based on [[http://www.edm2.com/index.php/DosDevIOCtl_(FAPI)]]